36 HP ProLiant DL385 Server Maintenance and Service Guide
Expansion Slot Cover
To remove the component:
1. Power down the server ("Powering down the server" on page 17
).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the server from the rack" on page 18).
3. Remove the access panel ("Removing the access panel" on page 19
).
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the PCI riser cage.
4. Remove the PCI riser cage ("PCI Riser Cage" on page 33).
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all PCI slots have either an expansion
slot cover or an expansion board installed.
5. Remove the expansion slot cover.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
