EasyManua.ls Logo

HP ProLiant DL388 - Series

HP ProLiant DL388
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error messages 129
172-1-Configuration Non-volatile Memory Invalid
Audible Beeps: None
Possible Cause: Nonvolatile configuration corrupted.
Action: Run the server setup utility and correct the configuration.
180-Log Reinitialized
Audible Beeps: None
Possible Cause: The IML ("Integrated Management Log" on page 77) has been reinitialized due to corruption
of the log.
Action: Event message, no action is required.
200 Series
201-Memory Error
Audible Beeps: None
Possible Cause: Memory failure detected.
Action: Run Insight Diagnostics ("HP Insight Diagnostics" on page 76) and replace failed components as
indicated.
203-Memory Address Error
Audible Beeps: None
Possible Cause: Memory failure detected.
Action: Run Insight Diagnostics ("HP Insight Diagnostics" on page 76) and replace failed components as
indicated.
207 - Invalid Memory Configuration Detected. DIMMs installed when no
corresponding processor is detected.
Description: Processor is required to be installed for memory to be used.
Action:
CAUTION: Before installing any processors, be sure to follow the guidelines provided in
"Performing processor procedures in the troubleshooting process (on page 17)." Failure to follow
the recommended guidelines can cause damage to the system board requiring replacement of the
system board.
Populate the processor socket or remove the DIMM.

Table of Contents

Other manuals for HP ProLiant DL388

Related product manuals