HP ProLiant DL560 Gen10 - Removing and Replacing the Flexiblelom

Removing and replacing the FlexibleLOM
Procedure
1. Power down the server (Power down the server on page 33).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack (Extend the server from the rack on page 33).
• Remove the server from the rack (Removing the server from the rack on page 34).
4. Remove the access panel (Removing the access panel on page 35).
5. Remove the PCIe riser cage (Removing and replacing a PCIe riser cage on page 51).
6. Remove the FlexibleLOM.
56 Removing and replacing the FlexibleLOM