To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant DL560 Gen10 and is the answer not in the manual?
General| Processor | Intel Xeon Scalable processors |
|---|---|
| Expansion Slots | Up to 8 PCIe 3.0 slots |
| Management | HPE iLO 5 |
| Form Factor | 2U Rack |
| Memory | Up to 6 TB DDR4 |
| Storage | SAS/SATA/NVMe |
| Network Controller | Embedded 4x1GbE ports |
| Storage Controller | HPE Smart Array |
| Drive Bays | Up to 24 SFF or 12 LFF |
| Network | Embedded 4-port 1Gb Ethernet (optional 10Gb/25Gb) |
Identifies components like drive bays, ports, and LEDs on the server's front.
Details components on the server's rear, including ports, power supplies, and risers.
Illustrates and lists the various components and connectors on the system board.
Provides a step-by-step procedure for initial server setup and installation.
Details necessary space, airflow, and temperature conditions for server installation.
Describes the procedures for powering the server on and off safely.
Covers installing various drive cages like 8-bay SFF HDD and NVMe SSD.
Guides the user through the process of installing a DIMM into the server's memory slots.
Details installing expansion boards into PCIe riser cages and slots.
Describes iLO 5 as a remote server management processor for monitoring and control.
Details the single-server deployment tool for server setup and OS installation.
Provides methods for updating the server's firmware and system ROM.
Lists available documents for resolving common server problems and error messages.
Lists operating temperature, humidity, and altitude specifications.
