Do you have a question about the HP ProLiant DL20 Gen10 and is the answer not in the manual?
Bus type | DMI3 |
---|---|
Tjunction | 100 °C |
Scalability | 1S |
Processor cache | 4 MB |
Processor cores | 2 |
Processor model | G5400 |
System bus rate | 8 GT/s |
Processor family | Intel Pentium G |
Processor socket | LGA 1151 (Socket H4) |
Processor threads | 4 |
Processor codename | Coffee Lake |
Execute Disable Bit | Yes |
Processor frequency | 3.7 GHz |
Processor cache type | Smart Cache |
Processor lithography | 14 nm |
Processor manufacturer | Intel |
Processor package size | 37.5 x 37.5 mm |
Processor operating modes | 64-bit |
PCI Express configurations | 1x16, 1x8+2x4, 2x8 |
Supported instruction sets | SSE4.1, SSE4.2 |
Thermal Design Power (TDP) | 54 W |
Number of processors installed | 1 |
Thermal solution specification | PCG 2015C |
Maximum number of PCI Express lanes | 16 |
Memory types supported by processor | DDR4-SDRAM |
Memory channels supported by processor | Dual |
Memory clock speeds supported by processor | 2400 MHz |
Memory bandwidth supported by processor (max) | 37.5 GB/s |
Maximum internal memory supported by processor | 64 GB |
On-board graphics card ID | 0x3E90/x93 |
On-board graphics card model | Intel® UHD Graphics 610 |
On-board graphics card OpenGL version | 4.5 |
On-board graphics card base frequency | 350 MHz |
On-board graphics card DirectX version | 12.0 |
On-board graphics card dynamic frequency (max) | 1050 MHz |
Number of displays supported (on-board graphics) | 3 |
Internal memory | 8 GB |
Memory clock speed | 2666 MHz |
Memory layout (slots x size) | 1 x 8 GB |
Power supply | 290 W |
Redundant power supply (RPS) support | No |
HDD size | - \ |
HDD interface | - |
Supported HDD sizes | 3.5 \ |
Total storage capacity | 0 GB |
Maximum storage capacity | - TB |
Number of HDDs installed | 0 |
Ethernet interface type | Gigabit Ethernet |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Chassis type | Rack (1U) |
Product color | Black |
PCI Express slots version | 3.0 |
Processor ARK ID | 129951 |
Intel Identity Protection Technology version | 1.00 |
Intel Stable Image Platform Program (SIPP) version | 0.00 |
Depth | 382.2 mm |
---|---|
Width | 434.6 mm |
Height | 43.2 mm |
Identifies and describes components on the server's front panel for various drive models.
Explains front panel LEDs and buttons, their status, and definitions for system monitoring.
Identifies and describes components located on the rear panel of the server.
Details and labels various components found on the server's system board.
Provides instructions on how to power on the server using different methods.
Details procedures for safely powering down the server and entering standby mode.
Step-by-step guide for installing the server into a rack.
Step-by-step instructions for safely removing the server from its rack.
Guides the user through the initial server installation process.
Provides critical warnings and cautions related to installing servers in racks.
Details precautions to prevent damage from electrostatic discharge during handling.
Step-by-step guide for installing the server rack rail kit.
Step-by-step guide for installing a Large Form Factor non-hot-plug drive.
Step-by-step guide for installing a DIMM module into a memory slot.
Procedure for installing a modular Smart Array controller (type-a, AROC).
Introduction to HPE iLO 5 for remote server management, monitoring, and control.
Lists methods for updating system firmware and ROM using various tools.
Lists documentation and resources available for troubleshooting server issues.
Provides links to view warranty information for HPE ProLiant and other products.
Details environmental specifications like operating temperature, humidity, and altitude.
Information on how to access HPE support and the data needed for assistance.