Launching the Embedded UEFI ShellLaunching the Embedded UEFI Shell
Use the Embedded UEFI Shell option to launch the Embedded UEFI Shell. The Embedded UEFI Shell is a preboot command-line
environment for scripting and running UEFI applications, including UEFI boot loaders. The Shell also provides CLI-based commands you
can use to obtain system information, and to configure and update the system BIOS.
PrerequisitesPrerequisites
Embedded UEFI Shell is set to Enabled.
ProcedureProcedure
1. From the System Utilities screen, select Embedded Applications > Embedded UEFI Shell.
The Embedded UEFI Shell screen appears.
2. Press any key to acknowledge that you are physically present.
This step ensures that certain features, such as disabling Secure Boot or managing the Secure Boot certificates using third-party
UEFI tools, are not restricted.
3. If an administrator password is set, enter it at the prompt and press Enter.
The Shell> prompt appears.
4. Enter the commands required to complete your task.
5. Enter the exit command to exit the Shell.
To Next Page
Loading...
