M.2 SSD optionM.2 SSD option
There are three ways to install an M.2 SSD in this server:
For M.2 NVMe SSD, install the SDD in either one of the following:
System board
M.2 SSD/dedicated iLO/serial port enablement board option
For M.2 SATA SSD, install the SSD in the M.2 SATA SSD enablement board option .
The SmartSSD Wear Gauge reports in the HPE Smart Storage Administrator contain information about the current usage level and
remaining expected lifetime of SSDs attached to the system. For more information, see the HPE Smart Array SR Gen10 Configuration
Guide at the Hewlett Packard Enterprise websiteHewlett Packard Enterprise website .
Use the M.2 SSD slot on the system board or on the optional M.2/dedicated iLO/serial port enablement board to install an M.2 SSD.
To Next Page
Loading...
