HP ProLiant DL20 Gen10 - Installing the Rack Rail Hook-And-Loop Strap

Installing the rack rail hook-and-loop strapInstalling the rack rail hook-and-loop strap
The rack rail hook-and-loop strap can be installed on either the left or right rack rail. Hewlett Packard Enterprise recommends installing
it on the left rack rail for better cable management.
ProcedureProcedure
1. Attach the strap carabiner to the rack rail.
2. Bundle the rear panel cables together, and then wrap the strap around the cables.
The installation is complete.
Installing the rack rail hook-and-loop strap 68