• Two-bay NVMe/Six-bay SFF HDD drive cages installed in boxes 1–3
8. Install the access panel (Installing the access panel on page 41).
9. Install the server into the rack (Installing the server into the rack on page 34).
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server (Powering up the server on page 38).
Riser and riser cage options
Installing the secondary PCIe riser cage
Prerequisites
Before installing this option, be sure that you have the following:
• T-10 Torx screwdriver
• The components included with the hardware option kit
68 Riser and riser cage options
To Next Page
Loading...
