Removal and replacement procedures 27
32.18-52.87 kg
70.94-116.56 lb
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
To remove the server from the rack:
1. Pull down the quick-release levers on each side of the server to release the server from the rack. If
necessary, loosen the rack screws.
2. Extend the server on the rack rails until the server rail-release latches engage.
3. Remove the server from the rack.
After performing the installation or maintenance procedure, do the following:
1. Mount the server on the rails:
To Next Page
Loading...
