HP ProLiant Gen8 - Entering Remote Support Information; Entering Rom Settings

◦ Network Share User—User name used to access the network share.
◦ Network Share Password—Password for the user name used to access the network share.
• For an FTP site, enter the following network connection settings:
◦ Server Name or IP Address—FTP server name or IP address of the server that hosts the OS
contents. FTP support requires anonymous access to the FTP server and does not support
connecting to an FTP server through a proxy.
IMPORTANT:
When entering an FTP path, do not include spaces and punctuation. The FTP server
directory structure cannot contain spaces or special characters (including punctuation).
3. Enter the user name and password for the Deployment Settings package to use to access the network
share.
This password is not encrypted. For a more secure access method, use FTP.
4. Select the OS and the keyboard language.
5. Enter the product key.
If you do not enter a product key and one is required, the OS installation pauses indefinitely, prompting
you to enter the key. The installation resumes after you enter the product key.
6. After clicking Deploy, verify that you are ready to create the new OS. Click Apply to install the OS.
NOTE:
When the command is sent to iLO, the system will reboot. Disc drives that you had previously
deployed may be erased.
Entering Remote Support information
Use the Remote Support screen to enable or disable Central Connect Remote Support. Direct Connect
Remote Support is not supported with the Deployment Settings feature.
If you enable Remote Support, enter the following settings:
• Local Remote Support Server—The hostname or IP address of the Insight RS server. In the Insight
RS software, the Insight RS server is called the hosting device.
• Local Remote Support Server Port—The port number to use. The default port number for Insight RS
is 7906.
For more information about the Central Connect Remote Support requirements, see Step 3: Registering
for Insight Remote Support .
Entering ROM settings
Use the ROM Settings screen to enter ROM-level settings.
Procedure
1. If this Deployment Settings package might be used to reprovision a server already in use, consider
whether to reset the server to its default settings before applying the settings in the Deployment
36 Using Intelligent Provisioning