NOTE:
To access this screen change preferences at a later time, open the Perform Maintenance menus,
and then click Intelligent Provisioning Preferences (Intelligent Provisioning Preferences on
page 32).
Step 2: Activating Intelligent Provisioning
When logging on to Intelligent Provisioning for the first time, the Activation screen is viewable after the
Setting Preferences screen.
To activate Intelligent Provisioning and make it available during server POST:
Procedure
1. Select Activate (Recommended).
2. Click the Continue right arrow to proceed automatically to Step 3: Registering for Insight Remote
Support .
To disable Intelligent Provisioning:
• Select Disable (Not Recommended).
• Click the Continue right arrow. The server reboots. During POST, F10 is in red text on the screen,
indicating that the F10 key is disabled and Intelligent Provisioning is no longer accessible.
To re-enable Intelligent Provisioning:
• Reboot the server and, when prompted, press F9 to access the ROM-Based Setup Utility (RBSU) or
UEFI System Utilities.
◦ In the RBSU, select Server Security > Intelligent Provisioning (F10 Prompt) > Enabled.
For more information on using RBSU, see the ROM-Based Setup Utility User Guide at
http://
www.hpe.com/support/rbsu.
◦ In the UEFI System Utilities, select System Configuration > ROM-Based Setup Utility (RBSU) >
Intelligent Provisioning (F10 Prompt) > Enabled.
For more information on UEFI System Utilities, see the UEFI System Utilities User Guide at http://
www.hpe.com/support/UEFI_UG_en.
Step 3: Registering for Insight Remote Support
HPE Insight Remote Support provides automatic submission of hardware events to HPE to prevent
downtime and enable faster issue resolution. You can register directly to HPE or through an Insight RS
Hosting Device.
HPE embedded remote support
Intelligent Provisioning includes the embedded remote support feature, which allows you to register
supported servers for HPE remote support.
Connecting a server to Hewlett Packard Enterprise allows it to be remotely supported and to send
diagnostic, configuration, telemetry, and contact information to Hewlett Packard Enterprise. No other
business information is collected, and the data is managed according to the Hewlett Packard Enterprise
privacy statement, which you can review at the following website: http://www.hpe.com/info/privacy.
Step 2: Activating Intelligent Provisioning 9
To Next Page
Loading...
