Included in the EULA is a link for ancillary software, which contains a list of open source and
proprietary software developed or obtained through third parties. This link and all other links in the
EULA are not enabled, but can be accessed if entered into a browser.
• To cancel using Intelligent Provisioning, click Reboot to exit the utility and reboot the server.
Intelligent Provisioning remains accessible.
3. Enter network settings.
Select the active NIC from the list, and then choose from one of the following IP addressing schemes:
• DHCP Auto-Configuration—HPE recommends selecting DHCP to have IP addresses assigned
automatically to your server.
• IPv4 Static—Selecting IPv4 adds four new fields: the static IPv4 address, network mask, gateway
address, and DNS address.
• IPv6 Static—Selecting IPv6 adds two fields: the static IP address and the Gateway address.
4. Specify whether you are using a proxy. If you have a proxy on your network, you might need to
configure it for use with features that communicate across the network. If you choose Use Proxy,
enter a Proxy Address and Port.
5. Enter iLO network settings.
Select one of the following iLO network IP addressing schemes:
• DHCP Auto-Configuration—HPE recommends selecting DHCP to have IP addresses assigned
automatically to your server.
• IPv4 Static—Selecting IPv4 adds four new fields: the static IPv4 address, network mask, gateway
address, and DNS address.
• Off—Selecting Off makes this server unavailable through iLO.
For more information about using iLO, see the HPE iLO 4 User Guide on the HPE website (http://
www.hpe.com/info/ilo/docs).
6. Select a delivery option for System Software Updates for Intelligent Provisioning.
• HPE website—HPE recommends selecting this option to be prompted when updates are available
and download all software updates for your server from HPE.com.
• HTTP/FTP—When prompted, enter an address in the URL field.
• Disable—Select this to disable automatic updates if you plan to update your system software
manually.
7. Confirm that the system date and time are accurate.
To change the date or time, click the displayed date or time and use the displayed calendar or clock to
select the new values.
8. Click the Continue right arrow to proceed automatically to Step 2: Activating Intelligent
Provisioning on page 9.
8 Using Intelligent Provisioning
To Next Page
Loading...
