• For more information, see the iLO 4 user guide.
• Optional: If you want to receive email alerts about system events, configure AlertMail on the
Administration > Management > AlertMail page in iLO.
• For more information, see the iLO 4 user guide.
Registering for Insight Remote Support central connect
Registering for Insight Remote Support central connect
Prerequisites
Your environment meets the prerequisites described in Prerequisites for remote support registration
on page 11.
Procedure
1. The remote support registration page opens after you complete Step 1 and Step 2 of the Intelligent
Provisioning initial configuration and registration tasks. It opens immediately if you navigated to the
Perform Maintenance page.
2. If the Get Connected to Hewlett Packard Enterprise window is not already open from the previous
step of the initial configuration and registration tasks, navigate to the Perform Maintenance page in
Intelligent Provisioning, and then select HPE Insight Remote Support.
3. Select Connect this server through my Connected Products host server.
4. Enter the host server host name or IP address and port number.
5. The default port is 7906.
6. Click Register.
7. Intelligent Provisioning notifies you that the registration process is finished.
8. To proceed to the Intelligent Provisioning home page, click the Continue right arrow.
Completing the post-registration steps
Registering for Insight Remote Support central connect 15
To Next Page
Loading...
