EasyManua.ls Logo

HP ProLiant XL450 Gen10

HP ProLiant XL450 Gen10
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HPE ProLiant XL450 Gen10 Server
Maintenance and Service Guide
Part Number: 881303-001
Published: October 2017
Edition: 1
Abstract
This guide describes identification and maintenance procedures, diagnostic tools,
specifications for hardware components and software for HPE ProLiant servers. This guide is
for an experienced service technician. Hewlett Packard Enterprise assumes you are qualified
in the servicing of computer equipment, trained in recognizing hazards in products, and are
familiar with weight and stability precautions.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant XL450 Gen10 and is the answer not in the manual?

HP ProLiant XL450 Gen10 Specifications

General IconGeneral
Product TypeServer
ProcessorIntel Xeon Scalable processors
Maximum Processors2
ManagementHPE iLO 5
Drive BaysUp to 24 SFF
NetworkingFlexibleLOM
Power SupplyRedundant Power Supplies
Operating System SupportMicrosoft Windows Server
MemoryUp to 3TB DDR4

Summary

Illustrated Parts Catalog

Server System Components

Lists server system components and their spare parts.

Trusted Platform Module Spare Parts

Lists spare parts for the Trusted Platform Module.

DIMM Spare Parts

Lists spare parts for DIMMs.

System Battery Spare Part

Lists spare parts for the system battery.

System Board Assembly Spare Part

Lists spare parts for the system board assembly.

Processor Spare Parts

Lists spare parts for processors.

Heatsink Spare Parts

Lists spare parts for heatsinks.

Server Options

Lists spare parts for server options.

Storage Controller Spare Parts

Lists spare parts for storage controllers.

SFF Flash Adapter Spare Parts

Lists spare parts for SFF Flash Adapters.

Hot-plug SFF Drive Spare Parts

Lists spare parts for hot-plug SFF drives.

microSD Spare Parts

Lists spare parts for microSD.

Cable Kit Spare Parts

Lists spare parts for cable kits.

Customer Self Repair

Removal and Replacement Procedures

Required Tools

Lists required tools for server maintenance procedures.

Preparation Procedures

Outlines steps to prepare for component replacement.

Power Down the Server

Details safe procedures for powering down the server.

Power Up the Server

Details procedures for powering up the server.

Remove the Server from the Chassis

Step-by-step guide to removing the server from chassis.

Install a Server

Steps for installing the server into the chassis.

Safety Considerations

General safety information before performing procedures.

Preventing Electrostatic Discharge

Precautions against ESD damage during handling.

Symbols on Equipment

Explains the meaning of various equipment symbols.

System Warnings and Cautions

Important warnings and cautions for server installation.

Removing and Replacing a Drive Blank

Procedure for removing and replacing drive blanks.

Removing and Replacing an SFF Drive

Procedure for removing and replacing SFF drives.

Removing and Replacing an NVMe Drive

Procedure for removing and replacing NVMe drives.

Removing and Replacing the SFF Flash Adapter Option

Procedure for removing and replacing SFF flash adapter.

Removing and Replacing a DIMM

Procedure for removing and replacing a DIMM.

Removing and Replacing the System Battery

Procedure for removing and replacing the system battery.

Removing and Replacing a Storage Controller

Procedure for removing and replacing a storage controller.

Removing and Replacing a Heatsink Blank

Procedure for removing and replacing a heatsink blank.

Removing and Replacing the System Board Assembly

Procedure for removing and replacing the system board assembly.

Re-entering the Server Serial Number and Product ID

Steps to re-enter serial number and product ID after replacement.

Troubleshooting

Troubleshooting Resources

Lists available troubleshooting guides and resources.

Diagnostic Tools

Product QuickSpecs

Information on product features, specifications, and options.

UEFI System Utilities

Details on UEFI System Utilities for system configuration.

Selecting the Boot Mode

Guide to configuring the server's boot mode.

Secure Boot

Explains the Secure Boot feature and its configuration.

Launching the Embedded UEFI Shell

Steps to launch and use the Embedded UEFI Shell.

Intelligent Provisioning

Information on the Intelligent Provisioning deployment tool.

HPE Insight Remote Support

Details on setting up and using remote support.

USB Support

Information on USB support and external functionality.

HPE Smart Storage Administrator

Guide to configuring HPE Smart Storage Administrator.

Component Identification

Front Panel Components

Identifies components on the server's front panel.

Front Panel LEDs and Buttons

Explains front panel LEDs and buttons.

Hot-plug Drive LED Definitions

Defines the LEDs for hot-plug drives.

NVMe SSD Components

Identifies NVMe SSD components and their LEDs.

SFF Flash Adapter Components and LED Definitions

Identifies SFF flash adapter components and LEDs.

Server Components

Identifies internal server components.

DIMM Slot Locations

Illustrates DIMM slot locations.

System Maintenance Switch

Details the system maintenance switch positions and functions.

Cabling

SUV Cable Connectors

Details SUV cable connectors and their uses.

Front IO and USB Board Cabling

Describes front I/O and USB board cabling.

Controller Cabling

Information on controller cabling.

Specifications

Environmental Specifications

Details environmental operating specifications.

Server Specifications

Lists physical and weight specifications for the server.

Documentation Feedback

Related product manuals