IMPORTANT:
Replacing the system board battery resets the system ROM to its default configuration. After
replacing the battery, reconfigure the system through UEFI System Utilities.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
Removing and replacing a storage controller
Procedure
1. Power down the server on page 21.
2. Remove the server from the chassis on page 22.
3. Place the server on a flat, level work surface.
4. Remove the storage controller.
Removing and replacing a storage controller 29
To Next Page
Loading...
