To Next Page

To Previous Page

Inserting a SIM card (select products only)

NOTE: This section applies only to computer models equipped with WWAN capability.

CAUTION: Inserting a SIM card of the wrong size could damage the SIM card or cause the SIM card to become

stuck in the slot. The use of SIM card adapters is not recommended. To prevent damage to the SIM card or

the connectors, use minimal force when inserting a SIM card.

NOTE: Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for

the computer:

1. Go to http://www.hp.com/support, and then search for the computer by product name or number.

2. Select Product Information.

3. Refer to the listed options to determine which card to purchase.

To insert a SIM card, follow these steps:

1. Turn o the computer by using the Shut down command.

2. Disconnect all external devices connected to the computer.

3. Unplug the power cord from the AC outlet.

4. Flip the panel/leather cover 360 degrees to access the SIM card slot. After the cover is ipped, the leather is

folded in half.

5. Insert the SIM card into the SIM card slot, and then press in on the SIM card until it is rmly seated.

NOTE: The SIM card in the computer may look slightly dierent from the illustration in this section.

To remove a SIM card, press in on the SIM card, and then remove it from the slot.

12 Chapter 2 External component identication

Questions and Answers:

Need help?

Do you have a question about the HP Spectre Folio and is the answer not in the manual?

HP Spectre Folio Specifications

General