Reverse this procedure to install the bottom cover.
Display EDP cable
NOTE: The display EDP cable includes adhesive.
Description Spare part number
For use only on computer models equipped with WLAN L43279-001
For use only on computer models equipped with WWAN L38678-001
Before removing the display EDP cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
28 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
