HP Spectre Folio User Manual

SIM card slot assembly
Description Spare part number
SIM card slot assembly L38675-001
Before removing the SIM card slot assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see Display panel on page 25).
Remove the SIM card slot assembly:
1. Release the ZIF connector (1) to which the SIM card slot assembly cable is connected, and then disconnect
the SIM card slot assembly cable from the transfer board.
2. Remove the two Phillips M2.0×2.3 broad head screws (2) that secure the SIM card slot assembly to
the display back cover.
3. Remove the SIM card slot assembly (3) and cable.
Reverse this procedure to install the SIM card slot assembly and cable.
Component replacement procedures 33

HP Spectre Folio Specifications

General

Brand	HP
Model	Spectre Folio
Category	Laptop
Language	English