To Next Page

To Previous Page

Power button board

Description Spare part number

Power button board L38691-001

Before removing the power button board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4. Remove the display panel (see Display panel on page 25).

5. Remove the webcam (see Webcam on page 36).

6. Remove the leather cover (see Leather cover on page 41).

Remove the power button board:

1. Remove the Phillips M2.0×2.9 screw (1) that secures the power button board to the keyboard.

2. Remove the power button board (2).

Reverse this procedure to install the power button board.

60 Chapter 5 Removal and replacement procedures

Questions and Answers:

Need help?

Do you have a question about the HP Spectre Folio and is the answer not in the manual?

HP Spectre Folio Specifications

General