HP Spectre Folio User Manual

90 pages

To Next Page

To Previous Page

1. Release the transfer board ribbon cable (1) from beneath the retention band.

2. Release the transfer board cable (2) from the retention clips (3) built into the lower frame.

3. Detach the transfer board ribbon cable (4) from the lower frame. (The transfer board ribbon cable is

attached to the lower frame with adhesive.)

4. Remove the transfer board cable (5).

Reverse this procedure to install the transfer board cable.

Component replacement procedures 55

Questions and Answers:

Need help?

Do you have a question about the HP Spectre Folio and is the answer not in the manual?

General