To Next Page

To Previous Page

Country/region Accredited agency Applicable note number

3. The appliance coupler, exible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese

Dentori Law. The exible cord must be Type VCTF, 3-conductor, 0.75 mm² or 1.25 mm² conductor size. The wall plug must be a two-

pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) conguration.

4. The exible cord must be Type RVV, 3-conductor, 0.75 mm² conductor size. Power cord set ttings (appliance coupler and wall plug)

must bear the CCC certication mark.

5. The exible cord must be Type H05VV-F 3-conductor, 0.75 mm² conductor size. KTL logo and individual approval number must be

on each element. Corset approval number and logo must be printed on a ag label.

6. The exible cord must be Type HVCTF 3-conductor, 1.25 mm² conductor size. Power cord set ttings (appliance coupler, cable, and

wall plug) must bear the BSMI certication mark.

7. For 127 V ac, the exible cord must be Type SVT or SJT 3-conductor, 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and

CSA or C-UL marks. For 240 V ac, the exible cord must be Type H05VV-F 3-conductor, 0.75 mm² or 1.00 mm2 conductor size, with

plug BS 1363/A with BSI or ASTA marks.

78 Chapter 10 Power cord set requirements

Questions and Answers:

Need help?

Do you have a question about the HP Spectre Folio and is the answer not in the manual?

HP Spectre Folio Specifications

General