To Next Page

To Previous Page

3. Remove the bottom bezel (3).

4. Remove the bottom bezel.

Reverse this procedure to install the bottom bezel.

Battery

Description Spare part number

4-cell, 41-WHr, 2.7-AHr, Li-ion battery (includes cable) 902500-855

Before removing the battery, follow these steps:

1. Shut down the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect all external devices connected to the tablet.

3. Disconnect the power from the tablet by rst unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the tablet.

4. Remove the display panel assembly (see Display panel assembly on page 20).

5. Remove the bottom bezel (see Bottom bezel on page 24).

Remove the battery:

1. Disconnect the battery cable (1) from the system board.

2. Remove the six Phillips PM2.0×2.8 screws (2) that secure the battery to the back cover.

Component replacement procedures 25

Questions and Answers:

Need help?

Do you have a question about the HP Spectre x2 and is the answer not in the manual?

HP Spectre x2 Specifications

General

Display Size	12.3 inches
Operating System	Windows 10
Battery Life	Up to 8 hours
Processor	7th Gen Intel Core m3/i5/i7
RAM	4GB/8GB
Storage	128GB/256GB/512GB SSD
Wireless	802.11ac Wi-Fi, Bluetooth 4.2
Ports	microSD card reader
Audio	Bang & Olufsen with dual speakers
Webcam	5MP front-facing
Dimensions	11.57 x 8.15 x 0.52 inches
Resolution	3000 x 2000 pixels