HP Spectre x2 User Manual

System board
NOTE: All system board spare part kits include a processor and replacement thermal material.
Description Spare part number
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 16-GB system memory, and the Windows 10 operating system
920545-601
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 16-GB system memory, and a non-Windows operating system
920545-001
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and the Windows 10 operating system
920544-601
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and a non-Windows operating system
920544-001
Equipped with an Intel Core i5-7260U 2.20-GHz (turbo up to 3.40-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and the Windows 10 operating system
920546-601
Equipped with an Intel Core i5-7260U 2.20-GHz (turbo up to 3.40-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and a non-Windows operating system
920546-001
Before removing the system board, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see Display panel assembly on page 20), and then remove
the following components:
a. Bottom bezel (see Bottom bezel on page 24)
b. Battery (see Battery on page 25)
c. Fan (see Fan on page 31)
d. Heat sink (see Heat sink on page 44)
When replacing the system board, be sure to remove the microSD memory card reader board (see MicroSD
memory card reader board on page 49) from the defective system board and install it on the replacement
system board.
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Audio jack board ZIF connector cable
(2) Left speaker cable
46 Chapter 5 Removal and replacement procedures

HP Spectre x2 Specifications

General

Display Size	12.3 inches
Operating System	Windows 10
Battery Life	Up to 8 hours
Processor	7th Gen Intel Core m3/i5/i7
RAM	4GB/8GB
Storage	128GB/256GB/512GB SSD
Wireless	802.11ac Wi-Fi, Bluetooth 4.2
Ports	microSD card reader
Audio	Bang & Olufsen with dual speakers
Webcam	5MP front-facing
Dimensions	11.57 x 8.15 x 0.52 inches
Resolution	3000 x 2000 pixels