HP Spectre x2 User Manual

1. Release the ZIF connector (1) to which the infrared camera cable is connected, and then disconnect
the infrared camera cable from the system board.
2. Detach the infrared camera (2) from the back cover. (The infrared camera is attached to the back cover
with double-sided adhesive.)
3. Remove the infrared camera.
Remove the front-facing webcam:
1. Release the ZIF connector (1) to which the front-facing webcam cable is connected, and then disconnect
the front-facing webcam cable from the system board.
Component replacement procedures 41

HP Spectre x2 Specifications

General

Display Size	12.3 inches
Operating System	Windows 10
Battery Life	Up to 8 hours
Processor	7th Gen Intel Core m3/i5/i7
RAM	4GB/8GB
Storage	128GB/256GB/512GB SSD
Wireless	802.11ac Wi-Fi, Bluetooth 4.2
Ports	microSD card reader
Audio	Bang & Olufsen with dual speakers
Webcam	5MP front-facing
Dimensions	11.57 x 8.15 x 0.52 inches
Resolution	3000 x 2000 pixels