HP StorageWorks 8/8 - SAN Switch User Manual

468 Configuring and monitoring FCIP extension services
Figure 80 Multiple tunnels to multiple ports, Fastwrite and Tape Pipelining enabled on a
per-tunnel/per-port basis
Unsupported configurations for Fastwrite and Tape Pipelining
The configurations shown in Figure 81 are not supported with Fastwrite and Tape Pipelining. These
configurations use multiple equal-cost paths.

HP StorageWorks 8/8 - SAN Switch Specifications

General

Port Speed	8 Gbps
Form Factor	1U
Switch Type	Fibre Channel
Product Type	SAN Switch
Fibre Channel Ports	8
Aggregate Switch Bandwidth	128 Gbps
Hot-swappable	No
Redundant Power Supplies	No
Management	Command Line Interface (CLI)
Power Supply	AC 100-240V
Ports	8