Figure 10 8/40 SAN Switch shipping carton contents
Table 8 8-Gb SAN Switch shipping carton checklist
DescriptionNumber
One accessory kit, containing the following items:
• One set of HP StorageWorks product documentation, including HP Storage-
Works 8-Gb SAN Switch quick start instructions, HP StorageWorks SAN
Switch Rack Mount Kit installation instructions, Read Me First, Safety Guides,
User License, and Warranty
• One serial cable, approximately 3 meters (10 ft.)
• Plenum (not shown) ships in your switch accessory kit only if required for in-
stalling your switch in an HP custom rack. See the HP StorageWorks SAN
Switch Rack Mount Kit installation instructions for details. The plenum is an air
duct that attaches to the SAN Switch Rack Mount Kit switch rails.
• Four rubber feet for mounting on a flat surface (a lab bench, for example)
• EZSwitch Setup CD
• One or two grounded power cords, as required for your particular switch
• Power Distribution Unit (PDU) power cords, as required for your particular
switch
1
SAN Switch Rack Mount Kit hardware and rail assemblies:
• Two rear mounting brackets
• A right inner rail and a right outer rail
• A left inner rail and a left outer rail
2
One 8-Gb SAN Switch, including power supply and fan assembly units
3
Installing and configuring an 8-Gb SAN Switch32
To Next Page
Loading...
