HP StorageWorks DAT Series - Verify backup configuration, media, and logs

Action recommended
Additional
information
and will be corrected in the next revision of Library
and Tape tools. This note will be updated once the
problem has been corrected but until then do not
use Library and Tape Tools to diagnose issues with
this product. This problem only relates to the
Q1546A product, no other DAT 40 variants are
affected.
Back to Start of Section
Back to Top
Upgrade to latest firmware
Action recommended
Additional
information
Upgrade to latest firmware using HP Library and Tape
Tools (L&TT).
NOTE:
Due to issues in development Library and Tape
Tools cannot be reliably used to diagnose potential
issues with the DAT 40 Hotplug drive (Q1546A
only). This problem is currently being investigated
and will be corrected in the next revision of Library
and Tape tools. This note will be updated once the
problem has been corrected but until then do not
use Library and Tape Tools to diagnose issues with
this product. This problem only relates to the
Q1546A product, no other DAT 40 variants are
affected.
Click here for
information on HP
Library and Tape
Tools.
Back to Start of Section
Back to Top
Check back-up logs
Action recommended Additional information
Check back-up logs.
Back to Start of Section
Back to Top
Check you are using a supported configuration and correct media
Action recommended Additional information
Check you are using a supported
configuration.
Click here to visit
www.hp.com/go/connect.