HP StorageWorks P9000 Integration Guide

Deploying the plug-in
1. Select HP StorageWorks P9000 Disk Array plug-in in the Management Plug-ins list and then
click the Deploy icon.
2. Select an Oracle agent for the deployment by clicking an agent.
3. Follow the steps provided by Enterprise Manager.
Adding a plug-in target instance
After the plug-in has been deployed to a host, you can add new target instances. To add target
instances:
1. Select HP StorageWorks P9000 Disk Array as the target type from the Add list in the Monitored
Targets section of the management agent home page where the plug-in has been deployed.
2. Click Go.
3. The Monitoring Configuration page of Plug-in appears. Enter the following plug-in instance
properties:
• EMCLI Installed Path
• Array Serial No
• LUNs for Performance Monitoring
• DB Instance for Performance Monitoring
Deploying the plug-in 9

HP StorageWorks P9000 Specifications

General

Brand	HP
Model	StorageWorks P9000
Category	Storage
Language	English