HP StoreEasy 1000

• —Indicates warning
• —Indicates minor or degraded
• —Indicates major error
• —Indicates critical error
• —Indicates unknown state
Overview
Click Overview to view a graphical representation of the space utilization for each volume
available in the system. To view the utilization details, select the bar that represents the volume
in the graph. The lower left pane displays the overall storage utilization of the system. The lower
right pane displays the utilization of the selected volume bar graph.
NOTE:
• MV indicates Mounted Volume in the Storage Overview graph. A mounted volume is a
volume that does not have a drive letter, but is mounted to another volume.
Drives
Click Drives to view details of the drives available in the system and the connected enclosures
and arrays.
The Drives tab is divided into two panes. The left pane displays a list of all drives and the right
pane provides a summary of the drive selected in the left pane. The following table describes
the fields that are available on this screen:
DescriptionField
Icons that represent the state of the individual drive.State
Name of the disk.Name
Location of the drive.Drive location
• For 3PAR StoreServ arrays, the location is in the
arrayname:cage:magazine:disk format.
• For Modular Smart Arrays (MSA), the location is in the
arrayname:enclosure index:slot format.
• For all other drives, the location is in the
location:bay format.
Size of the drive.Size
Type of drive.Type
Local name of the system.System
Alert message about the drive. If no alert is applicable,
an appropriate message is displayed.
Alerts
Usage of the drive.Utilization
Capacity utilization graph.Utilization (%)
Displays the following drive properties:Properties
• Serial number
• Model
• Firmware
• Speed
Using the StoreEasy Dashboard 101