HP StoreEasy 1000

DescriptionField
• Controller information
• Number of volumes associated with the selected drive.
• Number of shares associated with the selected drive.
NOTE: If the speed is displayed as zero for a specific
disk, the disk drive firmware might need an update.
Volumes
Click Volumes to view details of the volumes created on the connected enclosures and arrays.
All volumes available in the system, including operating system volumes are displayed.
The Volumes tab is divided into two panes. The left pane displays a list of all volumes and the
right pane provides a summary of the volume selected in the left pane. The following table
describes the fields that are available on this screen:
DescriptionField
Icons that represent the state of the individual volume.State
Name of the volume.Name
Label assigned to a specific volume.Label
Total capacity of the volume.Capacity
Type of provisioning. For example, Thin or Fixed.Provisioning
Raid level configuration of volume.Resiliency
Local name of the system.System
Alert message about the volume. If no alert is applicable,
an appropriate message is displayed.
Alert
Horizontal graph representing free, allocated, and total
space. If deduplication is enabled, a bar graph for
deduplication is also displayed.
Utilization
Displays the following volume properties:Properties
• Access path to the volume
• Encrypted (Yes or No)
• Clustered (true or false)
• Deduplication (Enabled or Disabled)
• Number of drives associated with the selected volume
• Number of shares associated with selected volume
Shares
Click Shares to view details of all shares available in the system.
The Shares tab is divided into two panes. The left pane displays a list of all shares and the right
pane displays a summary of the share selected in the left pane. To view additional details, click
102 Managing HPE StoreEasy 1000 Storage