1
The PCIe expansion slots 5-7 are associated with processor 2.
2
The PCIe expansion slots 1-4 and the FlexibleLOM slot are associated with processor 1.
Figure 13 StoreEasy 1650 Expanded Storage front panel LEDs
StatusDescriptionItem
Solid green = NormalHealth LED
1
1
Flashing green (1 Hz/cycle per sec) =
iLO is rebooting
Flashing amber = System degraded
2
Flashing red (1 Hz/cycle per sec) =
System critical
2
Solid green = Link to networkNIC status LED
1
2
Flashing green (1 Hz/cycle per sec) =
Network active
Off = No network activity
Solid green = Drives supported by the
SAS expander are functional.
3
Front drive health/thermal LED3
Solid amber = Failure or predictive
failure of one or more drives supported
by the SAS expander.
3
Flashing amber (1 Hz/cycle per sec) =
The temperature sensor in one or more
front drives is about to reach the
thermal threshold. Immediately slide
the front drive cages back into the
chassis and keep them there until the
LED turns green.
4
Off = No power present
5
Solid green = System onPower On/Standby button and system
power LED
1
4
Flashing green (1 Hz/cycle per sec) =
Performing power on sequence
Solid amber = System in standby
Off = No power present
5
Solid blue = ActivatedUID button/LED
1
5
16 HPE StoreEasy 1000 Storage
To Next Page
Loading...
