Table 8 Storage Management Provider errors (continued)
Recommended actionError messageError code
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The subsystem was not found in cache.0x2500503B
Retry the operation.Incompatible ResiliencySetting for this
operation.
0x2300503D
Retry the operation.Some of the parameter values supplied were
invalid.
0x23005040
Retry the operation.Some of the parameter values supplied were
invalid.
0x20005040
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Some of the parameter values supplied were
invalid.
0x25005040
Restart Storage Management Service.Failed to get the logical drives in the pool.0x24005041
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the logical drives in the pool.0x25005041
Restart Storage Management Service.Failed to get physical disk in the pool.0x24005043
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get physical disk in the subsystem.0x25005045
Restart Storage Management Service.Failed to get the pool for the physical drive.0x24005046
Restart Storage Management Service.Failed to get the physical disks in the enclosure.0x24005047
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache
Physical disks not supported as arguments to the
method.
0x20005048
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The operation was successful, but it has resulted
in the storage pools being renamed.
0x25005049
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get all pools from cache.0x2500504A
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the controller for the pool from cache.0x2500504B
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the disk(s) for the pool from the
controller.
0x2500504C
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to add an association to cache.0x2500504D
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The physical disk is in use. It cannot be deleted
from cache.
0x2500504E
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Invalid relation type.0x2500504F
Re-install Storage Management Provider.Failed to find the MI Main module.0x21005051
162 Troubleshooting, servicing, and maintenance
To Next Page
Loading...
