HP StoreEasy 1000 - Page 163

Table 8 Storage Management Provider errors (continued)
Recommended actionError messageError code
Re-install Storage Management Provider.Failed to initialize the MI Application.0x21005052
Re-install Storage Management Provider.The Storage Management Service is not able to
host the SMP.
0x21005053
Refer to the troubleshooting guide.The service failed to subscribe for events.0x26005054
Restart HPE Storage Management Service.Failed to get the proxy object.0x24005055
Re-install Storage Management Provider.Failed to load the SMProvider DLL. Either it is not
registered or is unable to load its dependencies.
0x21005056
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get all LUNs for the disk from the
controller.
0x25005059
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to remove association from the provider
cache.
0x2500505A
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The operation was successful, but it has resulted
in the storage pools being renamed.
0x2500505B
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The operation was successful, but it has resulted
in the storage pools being renamed.
0x2500505C
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The operation was successful, but it has resulted
in the storage pools being renamed.
0x2000505D
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get all logical drives from cache.0x2500505E
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the controller for the logical drive
from cache.
0x2500505F
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The disk(s) cannot be added to this pool because
it contains at least one LUN requiring RAID level
migration.
0x25005060
Re-install Storage Management Provider.Failed to remove partition data from the logical
drive. You must manually clear the disk or delete
0x21005061
the partition. Otherwise, subsequent volume
creation requests might fail.
Select valid RAID level.The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
0x20005062
RAID 5, RAID 6, RAID 50, RAID 60, RAID 10
(ADM), RAID 50 (2), RAID 50 (3), RAID 50 (4),
RAID 50 (5), RAID 1 (ADM), RAID 60 (2), RAID
60 (3), RAID 60 (4), RAID 60 (5).
Select valid RAID level.The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6.
0x20005063
Retry the operation.The length of the virtual disk friendly name
exceeds the maximum supported length.
0x23005064
Restart Storage Management Service.Failed to get the pool from the logical drive.0x24005065
Error codes 163