Table 3-36 New vWorkspace Connection Experience Settings (continued)
Option Description
Themes The theme to use with this connection.
Bitmap caching Enable bitmap caching.
Click Next to continue.
8. Set the appropriate advanced options (refer to
Table 3-9 New Connection Advanced Settings
on page 10).
9. Click Finish to save your settings and close the dialog box.
NOTE: To enable vWorkspace USB Redirection, use the USB Manager utility. See USB Manager
on page 38 for instructions.
VMware View
PC-over-IP (PCoIP) is a communications protocol integrated into VMware that enables remote
access to virtual machines.
1. To add a VMware View connection, click Connections > Add.
2. Select VMware View and set the appropriate network options:
Table 3-37 New VMWare View Connection Network Settings
Option Description
Name The connection name
Server The name of the remote server.
Username The username to use for the connection.
Password The pasword to use for the connection.
Domain The domain to use for the connection.
Desktop The desktop to use for the connection.
Click Next to continue.
3. Set the appropriate options:
Table 3-38 New VMWare View General Settings Options Settings
Option Description
Login options
Automatic login Login automatically when the connection is established.
Allow Smartcard login Allow a locally-connected SmartCard to provide login credentials.
Command Line Arguments The command line arguments to be used for the connection.
ENWW
Connections
23
To Next Page
Loading...
Need help?
General