●
Desktop: Desktop options
●
System: Asset information and WakeOnLAN mode
NOTE: This option is not available on all models.
Setting Connections and Control Panel User Permissions
To set user permissions on the Connections and Control Panel tabs:
1. Double-click HP ThinPro Configuration.
2. Click Connections in the left panel and select authorized connections by selecting or clearing
check boxes.
3. Click Control Panel in the left panel and select authorized applications by selecting or clearing
check boxes.
4. Click Apply, then click OK to close the dialog box.
Setting User Desktop and System Options
To configure the Desktop and System tabs:
1. Double-click HP ThinPro Configuration.
2. Click Desktop in the left panel and select desktop options by selecting or clearing check boxes.
3. Click System in the left panel and set asset information and enable or disable the WakeOnLAN
mode by selecting or clearing check boxes.
NOTE: This option is not available on all models.
4. Click Apply, then click OK to close the dialog box.
Personalization
These utilities allow you to personalize the thin client. The following utilities are available on the
Personalization tab:
●
Boot Logo on page 44
●
Desktop Background on page 45
●
Screensaver on page 45
●
Window Manager on page 46
Boot Logo
This feature allows you to design the bootsplash image.
1. Double-click Boot Logo.
2. Select a boot splash image.
NOTE: Image files must be .jpg or .png files.
a. Click Select an image.
b. Browse for the image file, and then click Open.
44 Chapter 3 Reference ENWW
To Next Page
Loading...
Need help?
General