HP t5565 - Thin Client - Date and Time; Global Network Settings

●
Language on page 40
●
Network Connections on page 40
●
Security on page 43
●
HP ThinPro Configuration on page 43
Date and Time
To set date, time, and time zone information:
1. Double-click Date and Time.
2. Select the date, Time, and Timezone.
3. If you would like to use the network time server instead, select Use Network Time Server and
type the server address in the field.
4. If you would like to display the week number in the calendar, click Show Week Numbers.
5. Click Apply, and then click OK to save your changes and close the dialog box.
Global Network Settings
To configure global network settings:
1. Double-click Global Network Settings.
2. Configure the global network on three tabs:
●
General - The following table lists the options available:
Table 3-44 Global Network Settings - General
Option Description
Host name The host name of thie thin client.
Use local host name
Use locally defined hostname, do not send/receive the
client host name via DHCP.
Send host name to DHCP
Send the local host name to DHCP. This option is only
available if the previous optionis enabled.
Get host name from DHCP Get the local host name from the DHCP server.
Domain name The domain to which this thin client belongs.
HHTP Proxy The proxy to be used for HTTP communications.
FTP Proxy The proxy to use for FTP communications.
DHCP Timeout The timeout for DHCP communications.
●
Ethernet - The following table lists the options available:
ENWW
Control Panel
39