Click Next to continue.
4. Set the appropriate RDP options:
Table 3-39 New VMWare View Connection RDP Settings
Option Description
Sound redirection
Enable sound redirection Valid options are: off, local and remote.
Device mappings
Enable USB storage
mapping
The assigned drive letter should be chosen from the drop-down list.
Enable port mapping Allow the mapping of local ports to the remote system.
Enable printer mapping Allow the mapping of local printers to the remote ystem.
Click Next to continue.
5. Set the appropriate advanced options (refer to
Table 3-9 New Connection Advanced Settings
on page 10).
6. Click Finish to save your settings and close the dialog box.
To start a desktop connection using PCoIP instead of RDP:
1. Click Connections > Add.
2. Select a connection in the Connections window and click Connect.
Type the host name of IP address of the View Connection Server in the field, if necessary.
3. Type the user name, password, and domain names in the corresponding fields and click
Connect.
4. Click the arrow on the right side of the Desktop pool. Select Protocols > PCoIP.
5. Click Connect.
NOTE: To set PCoIP as the default protocol or to disable user protocol selection, edit the
desktop/pool settings in the VMware View Manager window (http://<Server>/admin).
NOTE: To set PCoIP as the default protocol or to disable user protocol selection, edit the desktop/
pool settings in the VMware View Manager window (http://<server>/admin).
NOTE: To enable VMware View USB Redirection, use the USB Manager utility. See USB Manager
on page 38 for instructions.
Xdmcp
XDMCP is a way to connect directly to remote X servers. X servers are used to display graphics on
most UNIX-like operating systems, such as Linux, Berkeley Software Distribution (BSD), and Hewlett
Packard UniX (HP-UX).
24 Chapter 3 Reference ENWW
To Next Page
Loading...
Need help?
General