User View
NOTE: This feature is available only in the Administrative Mode.
1. To select connections to be visible in the User Mode, click User View.
The Allow and Deny buttons appear above the Connection Name bar.
2. Select one or more of the connections listed.
3. Click Allow to allow the connections to be visible in the User Mode or click Deny to make the
connection unavailable in the User Mode.
4. Click User View again when you have completed your changes.
Control Panel
Control Panel utilities are organized under five tabs:
●
Peripherals on page 29
●
Setup on page 38
●
Personalization on page 44
●
Management on page 46
●
Advanced on page 54
All control panel items are availble for use when you are in Administrator Mode; in non-Administrator
mode only the items allowed by the configuration are available. This list of control panel items can be
modified while in Administrator Mode by using the Setup tab and then the HP ThinPro
Configuration tool.
28 Chapter 3 Reference ENWW
To Next Page
Loading...
