Editing a Wired Network Connection
To edit a wired connection:
1. Click the Wired tab.
2. Select the connection you want to change and click Edit.
3. Change setting by revising the information on the three tabs:
●
Wired
●
802.1x Security
●
IPv4 Settings
4. Click Apply to apply your settings and close the dialog box.
Deleting a Wired Network Connection
To delete a wired connection:
1. Click the Wired tab.
2. Select the connection you want to remove and click Delete.
3. Click Delete to confirm that you want to delete the connection.
4. Click Close to close the dialog box.
Wireless Connection
Adding a Wireless Connection
To add a wireless connection:
1. Click the Wireless tab, and then click Add.
2. Choose whether or not to Connect automatically.
3. Configure the new setting by completing the information on the three tabs:
●
Wireless
●
Wireless Security
●
IPv4 Settings
4. Click Apply to apply your settings and close the dialog box.
Editing a Wireless Connection
To edit a wireless connection:
1. Click the Wireless tab.
2. Select the connection you want to change and click Edit.
ENWW
Control Panel
41
To Next Page
Loading...
