Table 10-1 Computer specications (continued)
Metric U.S.
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this range of
temperatures.
Display specications
This section provides specications for your display.
Table 10-2 Display specications
Metric U.S.
Active diagonal size 39.6 cm 15.6 in
Resolution 1920 × 1080 (FHD)
Surface treatment Antiglare
Brightness 250 nits (45% NTSC)
300 nits (100% sRGB)
Viewing angle UWVA
SVA
Backlight WLED
Display panel interface eDP
Solid-state drive specications
This section provides specications for your solid-state drives.
Table 10-3
Solid-state drive specications
256 GB* 512 GB* 1 TB*
Dimensions
Height 1.0 mm 1.0 mm 1.0 mm
Length 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g
Interface type PCIe PCIe PCIe
Ready time, maximum (to not busy) 1.0 ms < 1.0 ms 1.0 ms
Access times, logical 0.1 ms 0.1 ms 0.1 ms
Transfer rate
Sequential read up to 2150 MBps up to 2150 MBps up to 2150 MBps
Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MBps up to 1550 MBps up to 1550 MBps
78 Chapter 10Specications
To Next Page
Loading...
Need help?
General
