Antenna
Description Spare part number
Antenna 902341-001
Before removing the antenna, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 22).
5. Remove the battery (see Battery on page 29).
Remove the antenna:
1. Peel the antenna o the shield (1).
2. Disconnect the antenna cable from the system board (2).
3. Remove the antenna cable from its routing path in the display enclosure (3).
4. Remove the antenna from the display panel assembly (4).
Reverse this procedure to install the antenna.
Tablet component replacement procedures 27
To Next Page
Loading...
Need help?
General
