Battery
Description Spare part number
Battery, 2-cell, 32-Wh (includes cable) 859517-855
Before removing the battery, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 22).
5. Remove the LCD shield (see LCD shield on page 28).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing the
battery.
Remove the battery:
1. Lift the battery straight up and out of the display assembly.
2. Remove the battery.
Reverse this procedure to install the battery.
Tablet component replacement procedures 29
To Next Page
Loading...
Need help?
General
