14 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
Features and requirements
Ask your HP service representative about the latest supported hardware and
software.
The disk array has the following features:
• Storage capacity. The storage capacity for each model is listed below:
XP128: From 8 to 128 drives for up to 18 TB, 48 FC ports
XP1024: From 8 to 1024 drives for up to 149 TB, 64 FC ports
XP10000: Up to 240 drives for up to 69.2 TB, 48 FC ports
XP12000: Up to 1152 drives for up to 165 TB, 128 FC ports
• Server support. HP e3000: A-Class, N-Class, Series 9x8, Series 9x9, and
Series 99x
• Operating system support. MPE/iX Operating System, Release 7.0
Express 1 with patch MPEMX36, or Release 7.5
Before installing the disk array, ensure the environment conforms to these
requirements::
• Fibre Channel host adapters (for A-Class and N-Class only) or HVD
SCSI adapters (for Series 9x8, Series 9x9, and Series 99x system
models). Refer to the adapter documentation for installation. Use of SCSI
adapters also requires SCSI-FC Fabric Routers as described later in this
document.
• (Recommended) HP StorageWorks Remote Web Console XP, Command
View XP Advanced Edition or Command View XP with LUN management
feature for configuring disk array ports and paths
To Next Page
Loading...
Need help?
General
