Installation 21
Setting the System Option Modes
The HP service representative sets the System Option Mode(s) based on the
operating system and software configuration of the host.
Mode Level
HA
Software
Description and Usage
140 Optional None ON: Response to the Inquiry command is
changed, and the volume can be used from
VeritasNetBackUP in heterogeneous OS
configuration, such as HP-UX.
OFF: Normal response to the Inquiry
command.
186 Mandatory Veri ta s
Database
Editions/
Advanced
Cluster
ON: Mandatory setting when VERITAS
Database Editions/Advanced Cluster is
connected.
OFF: VERITAS Database Editions/Advanced
Cluster should not be connected with this
setting.
254 Optional Veri ta s
Database
Editions
Change the response of reserve conflict status
to Read Capacity, Verify, and Start Stop Unit.
ON: Normal end is reported.
OFF: Reserve conflict status is reported.
280 Optional HP-UX Ghost LUN Remove
OS version: HP-UX 11.0 and later.
ON: When the host scans the LUNS on the
port, the disk array is not represented in the
device list for HP-UX.
OFF: When the host scans the LUNS on the
port, the disk array is represented in the device
list for HP-UX.
To Next Page
Loading...
Need help?
General
