16 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
Device types
The HP e3000 system supports only OPEN-x device types. LUSE and CVS
device types are not supported.
Failover
The XP family of disk arrays supports many standard software products
that provide host, application, or I/O path failover and management.
The HP e3000 system supports I/O path failover for the disk arrays by
means of the MPE/iX High Availability FailOver/iX software product.
SNMP configuration
The XP family of disk arrays supports standard Simple Network
Management Protocol (SNMP) for remotely managing the disk array. The
SNMP agent on the SVP performs error-reporting operations requested by
the SNMP manager. SNMP properties are usually set from the SVP but
they can also be set remotely using Remote Web Console XP, Command
View XP, or Command View XP Advanced Edition. Refer to the
applicable user’s guide for procedures.
Refer to the operating system documentation to configure the SNMP
manager on the host.
To Next Page
Loading...
Need help?
General
