Installation 15
• (Recommended) HP StorageWorks LUN Configuration and
Security Manager XP
• (Optional) Other available XP software (some may not be
supported by your system):
HP StorageWorks Business Copy XP
HP StorageWorks Continuous Access XP
HP StorageWorks Continuous Access Extension XP
HP StorageWorks Auto LUN XP
HP StorageWorks Data Exchange XP
HP StorageWorks Resource Manager XP
HP StorageWorks RAID Manager XP
HP StorageWorks Cache LUN XP
HP StorageWorks Auto Path XP
HP StorageWorks Cluster Extension XP
HP StorageWorks Performance Advisor XP
Fibre Channel interface
The MPE/iX host can use the A7895A 2 Gbps Fibre Channel HBA to
connect to the disk array. The disk array port should not use auto negotiate
to detect the speed of the host Fibre Channel adapter. Configure it "hard" to
either 1 or 2 Gbps.
Even though the interface is Fibre Channel, this guide uses the term “SCSI
disk” because disk array devices are defined to the host as SCSI disks.
SCSI-FC Fabric Router
The HP e3000 supports the A5814A-003 SCSI-FC Fabric Router hardware,
which enables an HP e3000 with HVD SCSI HBAs to connect to a disk
array with a Fibre Channel interface. The router converts data between the
SCSI I/O interface at the host server and the Fibre Channel I/O interface at
the disk array.
To Next Page
Loading...
Need help?
General
