HP XP1024 Operating System Configuration Guide

4 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
Install the host hardware 24
Installing the host system 24
Installing and configuring the HBAs 24
Fabric zoning and LUN security 25
Multiple operating systems in a shared switch fabric 26
Connect the disk array 27
Determining the paths 28
Storage capacity per path 29
Load the OS software 30
Configure the disk array devices in MPE/iX 31
Configuring with native Fibre Channel disk array attachment 32
Configuring with SCSI-FC fabric router disk array attachment 35
Create volume sets and volumes 39
2 Troubleshooting 41
Error conditions 42
Calling the HP support center 44
A Disk array device emulations 45
Supported emulations 46
Device type specifications 47
B Booting from the array 51
Existing MPE/iX 7.5 boot disk is available 54
No existing MPE/iX boot disk available and disk array is direct Fibre
Channel connected 57
No existing MPE/iX boot disk available and disk array is Fibre Channel
switch connected 59
Primary boot path format for Fibre Channel devices 59
Determining the FC N-Port I/O path 60
Glossary 63
Index 67

HP XP1024 Specifications

General

Brand	HP
Model	XP1024
Category	Storage
Language	English