56 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
5. Shut down the running system and reset (or TC) the computer.
CSYLE18<PUB.SYS>: shutdown system
SESSION aborted by system management. (CIERR 6027)
CPU=2. Connect=60. TUE, AUG 24, 2004, 3:53 PM.
15:53/#S2/46/LOGOFF ON LDEV #20.
Spoolers notified of a shutdown. (Shut 16)
15:53/47/The Spooling system has been shutdown.
Shutdown of system processes begins. (Shut 4)
Shutdown of system managers begins. (Shut 5)
Shutdown of operating system complete. (Shut 6)
6. Set the system’s primary boot path to the BOOT MENU PATH you
noted in step 4 above.
Main Menu: Enter command or menu > pa pri 0/6/0/0.8.0.102.0.0.2
Primary boot path: 0/6/0/0.8.0.102.0.0.2
0/6/0/0.8.0.66.0.0.2(hex)
7. You can now install the OS from the SLT (System Load Tape) on the
alternate boot path onto the disk array device on the primary boot path.
Primary boot path: 0/6/0/0.8.0.102.0.0.2
Alternate boot path: 0/0/2/0.6
Console path: 0/0/4/0.0
Keyboard path: 0/0/4/0.0
Main Menu: Enter command or menu > bo alt
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
SOFT Booted.
TAPEIPL Version 1.0
ISL loaded
ISL Revision A.00.43 Apr 12, 2000
ISL> install
……
8. When you are finished loading the OS software, return to the main body
of this document at
“Configure the disk array devices in MPE/iX” (page
31).
To Next Page
Loading...
Need help?
General
