To Next Page

To Previous Page

58 HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX

STARTING EXECUTION OF MAPPER2

Processor Identification:

Hardware Model: 5CBH, Revision: 0

Software Model: 4H, Revision: 0

… …

I/O Configuration:

Type HW SW Revisions

Path Component Name ID Model Model Hdwr Firm

---------- ----------------------------------- ----- ----- ----- ----- -----

0 Astro BC Runway Port CH 582H BH 0 0

0/0 Elroy PCI Bridge DH 782H AH 0 0

0/0/0/0 Ethernet Controller 1011H 0019H 103CH 104FH 41H

… …

0/6/0/0 HP 6795A 2G/1G Fibre Chan. Adapter 103CH 1029H 103CH 128CH 0BH

0/6/0/0.8.0.102.0.0.0

HP OPEN-3 - - - - 0118

0/6/0/0.8.0.102.0.0.1

HP OPEN-3 - - - - 0118

0/6/0/0.8.0.102.0.0.2

HP OPEN-3 - - - - 0118

0/6/0/0.8.0.102.0.0.3

HP OPEN-3 - - - - 0118

4. Exit the ODE environment back to the ISL> prompt, and set the desired

primary boot path.

ODE> exit

ISL> primpath 0/6/0/0.8.0.102.0.0.2

5. Now INSTALL the OS software from the SLT on the alternate boot path

to the selected disk array device on the primary boot path.

ISL> install

… …

6. When finished loading the OS software, return to the main body of this

document at

“Configure the disk array devices in MPE/iX” (page 31).

HP XP1024 Operating System Configuration Guide

Other manuals for HP XP1024